증기중합으로 제조된 전도성 고분자 박막의 전기 변색 특성
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국막학회
ㆍ수록지정보 : 멤브레인 / 20권 / 1호
ㆍ저자명 : 이지예, 김유나, 김은경
ㆍ저자명 : 이지예, 김유나, 김은경
한국어 초록
전도성 고분자 중 안정성이 높은 Poly(3,4-ethylenedioxythiophene) (PEDOT)을 이용하여 전기변색 박막을 제조하고 박막제조 방법에 따른 전기변색 특성을 연구하였다. PEDOT 박막은 전기중합법과 증기중합법에 의해 제조되었고, 두가지 방법 모두 도핑되지 않은 중성 상태에서 짙은 푸른색을 띠는 박막으로 제조되었다. 전기변색 특성을 평가하기 위하여 UV-Vis spectrophotometer와 Cyclic voltammetry가 사용되었으며, 산화/환원 시 표면은 AFM으로 관찰되었다. 전기 중합법으로 제조된 PEDOT 박막에 비해 증기중합에 방법에 의해 제작된 PEDOT 박막의 표면이 거칠기 50 nm 이내로 균일 하였다. 특히 증기 중합법을 이용하여 제조된 전기 변색 소재의 특성도 응답성 1.5초 이내, 49%의 투과율 차이, 402의 변색 효율을 보여 박막의 특성 향상으로 전기변색특성이 향상 된 결과를 보였다.영어 초록
Poly(3,4-ethylenedioxythiophene) (PEDOT), which has the highest stability in conducting polymer was employed to electrochromic (EC) film and studied about electrochromic properties according to the film fabrication method. PEDOT films were coated by two different methods, electropolymerization (EP) and vapor phase polymerization (VPP). Both of PEDOT films showed dark blue color at dedoped neutral state. Spectroelectrochemistry, switching ability and stability of the devices were investigated by UV-Vis Spectrophotometer and Cyclic voltammetry. Surface morphologies of the PEDOT VPP film at oxidized and reduced state were obtained by AFM. The average surface roughness of the PEDOT-VPP film was 50 nm and more homogeneous than that of the PEDOT-EP. The EC property from the PEDOT-VPP film was improved compared to that of the PEDOT-EP film, to show a response time of 1.5 sec, transmittancechange of 49%, and coloration efficiency of 402.참고 자료
없음"멤브레인"의 다른 논문
- 가지형 공중합체/TiO2 나노복합 고분자 전해질막의 제조 및 분석7페이지
- 염료감응형 태양전지를 위한 고분자 전해질막에서의 가소제의 효과8페이지
- 염료감응형 태양전지를 위한 KI 및 I2를 포함하는 유기/무기 복합 전해질막의 이온전도특성에 대한 ..8페이지
- 직접메탄올 연료전지의 Multiscale 모델링 및 전산모사11페이지
- Nafion 용액 함침과 전기방사를 이용한 고분자 전해질 연료전지용 폴리에테르술폰 막7페이지
- PDMS-NaYZeolite 막에 의한 수소-질소 분리에 관한 연구8페이지
- Polystyrene-b-Poly(oxyethylene methacrylate) 블록 공중합체 막을..7페이지
- 수소 분리를 위한 V/YSZ cermet 분리막의 제조 및 안정성7페이지
- Pd 코팅된 Ta/YSZ 수소분리막의 제조 및 안정성7페이지
- 비용매증기 유발 상 전이 공정을 이용한 PES 멤브레인 제조에 있어 2-butoxyethanol 첨..11페이지