L형 프리캐스트 콘크리트 벽패널로 채운 기존 철근 콘크리트 골조 구조물의 전단 거동 분석
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국복합신소재구조학회
ㆍ수록지정보 : 복합신소재구조학회 논문집 / 6권 / 2호
ㆍ저자명 : 유승룡, 주호성, 하수경
ㆍ저자명 : 유승룡, 주호성, 하수경
목차
1. 서 론2. 전단 연결부
3. 실험체
4. 실험체 설계
5. 실험결과 및 분석
6. 결 론
감사의 글
References
영어 초록
The purpose of this study is to develop a new seismic resistant method by using precast concrete wall panels for existing low-rise, reinforced concrete beam-column buildings such as school buildings. Three quasi-static hysteresis loading tests were experimentally performed on one unreinforced beam-column specimen and two reinforced specimens with L-type precast wall panels. The results were analyzed to find that the specimen with anchored connection experienced shear failure, while the other specimen with steel plate connection principally manifested flexural failure. The ultimate strength of the specimens was determined to be the weaker of the shear strength of top connection and flexural strength at the critical section of precast panel. In this setup of L-type panel specimens, if a push loading is applied to the reinforced concrete column on one side and push the precast concrete panel, a pull loading from upper shear connection is to be applied to the other side of the top shear connection of precast panel. Since the composite flexural behavior of the two members govern the total behavior during the push loading process, the ultimate horizontal resistance of this specimen was not directly influenced by shear strength at the top connection of precast panel. However, the RC column and PC wall panel member mainly exhibited non-composite behavior during the pull loading process. The ultimate horizontal resistance was directly influenced by the shear strength of top connection because the pull loading from the beam applied directly to the upper shear connection. The analytical result for the internal shear resistance at the connection pursuant to the anchor shear design of ACI 318M-11 Appendix-D except for the equation to predict the concrete breakout failure strength at the concrete side, principally agreed with the experimental result based on the elastic analysis of Midas-Zen by using the largest loading from experiment.참고 자료
없음태그
"복합신소재구조학회 논문집"의 다른 논문
- 케이블댐퍼 감쇠성능의 수치해석적 연구8페이지
- 원전 냉각수 취수용 지중매설 GFRP관의 구조적 거동 조사6페이지
- 대용량 스테인리스 강재 사각형 물탱크 구조의 유한요소 응력해석6페이지
- 40m 조합모듈교량 상부구조 이송에 따른 안전성 검토8페이지
- 섬유보강 시멘트 복합체의 특성에 미치는 선반 스크랩 규격의 영향7페이지
- 무시멘트 콘크리트의 염소이온 침투 및 황산염 침투 저항성7페이지
- L형 프리캐스트 콘크리트 벽패널로 채운 기존 철근 콘크리트 골조 구조물의 휨 거동 분석11페이지
- FRP 패널로 보강한 강골조의 가이드 시스템에 따른 성능평가6페이지
- 자기부상철도 일체형 궤도시스템 적용을 위한 해석적 연구6페이지
- 강관내부 보강재를 고려한 용접조립 각형 CFT 편심 장주의 내력 및 휨 거동8페이지