Analysis of the Behavior of Tubular-Type Equipment for Nuclear Waste Treatment : Sensitivities of the Parameters Affecting Mass Transfer Yield
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국방사성폐기물학회
ㆍ수록지정보 : 방사성폐기물학회지 / 5권 / 1호
ㆍ저자명 : Jae-Hyung Yoo, Byung-Jik Lee, Joon-Bo Shim, Eung-Ho Kim
ㆍ저자명 : Jae-Hyung Yoo, Byung-Jik Lee, Joon-Bo Shim, Eung-Ho Kim
목차
Abstract 요약 I. 서론 II. 튜브형 반응기 가. 화학반응기 모사 나. 확산계수의 영향 다. 반응속도상수의 영향 III. 다단식 용매추출 장치 가. 용매추출 장치 내에서의 농도 분포 나. 역혼합의 영향 다. 분배계수의 영향 IV. 흡착탑 가. 흡착탑 모사 나. 흡착 속도 및 흡착 용량 V. 결론 감사의 글 참고문헌한국어 초록
본 연구에서는 방사성폐기물의 화학처리공정에 자주 사용되는 유동관식 장치 중 튜브형 반응기, 다단식 용매추출 장치, 흡착탑 등 물질전달이 수반되는 장치에 있어 각종 매개변수들이 반응수율이나 물질전달수율에 미치는 영향과 민감도를 살펴보았다. 먼저 각 장치에 대한 거동을 묘사하기 위하여 수학적 모델링을 수행하였고 전산모사를 통하여 해당 장치의 거동을 예측하였다. 그리고 그 결과로부터 해당 공정의 고유한 매개변수들이 반응수율 또는 물질전달수율에 미치는 영향과 민감도를 분석하였다. 튜브형 반응기에서는 확산계수, 반응속도상수 등이 반응수율에 미치는 영향을, 다단식 용매추출 장치에서는 연속상과 분산상의 분배계수, 연속상 흐름의 역혼합 등이 추출수율 및 장치 내 농도 분포에 미치는 영향을 고찰하였다. 또 흡착탑에 있어서는 흡착평형상수 및 유체-흡착재간 물질전달계수 등이 흡착 속도에 미치는 영향을 조사하였다.영어 초록
It was intended in this study to investigate the effects of various parameters on the chemical reaction or mass transfer yield in a tubular-type nuclear waste treatment equipment. Since such equipments, as a tubular reactor, multistage solvent extractor, and adsorption column, accompany chemical reaction or mass transfer along the fluid-flowing direction, mathematical modeling for each equipment was carried out first. Then their behaviors of the chemical reaction or mass transfer were predicted through computer simulations. The inherent major parameters for each equipment were chosen and their sensitivities. affecting the reaction or mass transfer yield were analyzed. For the tubular reactor, the effects of axial diffusion coefficient and reaction rate constant on the reaction yield were investigated. As for the multistage solvent extractor, the backmixing of continuous phase and the distribution coefficient between fluid and solvent were considered as the major parameters affecting the extraction yield as well as concentration profiles throughout the axial direction of the extractor. For the adsorption column, the equilibrium constant between fluid and adsorbent surface, and the overall mass transfer coefficient between the two phases were taken as the major factors that affect the adsorption rate.참고 자료
없음이 자료와 함께 구매한 자료
- 종합설계_ 9페이지
- [분리공정]바이오에탄올로부터 무수에탄올 생산을 위한 공비증류공정의 모사 18페이지
- 프로판의 수증기 개질반응 Kinetics Model 선정과 반응기 크기 결정 18페이지
- 바이오에탄올을 이용한 무수 에탄올 공비증류공정 설계 21페이지
- 화공종합설계 27페이지
"방사성폐기물학회지"의 다른 논문
- The Direct Dissolution of Ion-Exchange Resin by Fenton'..6페이지
- Measurement of the Gap and Grain Boundary Inventories o..6페이지
- A Study on Ventilation System of Underground Low-Interm..14페이지
- Cesium Release Behavior during the Themal Treatment of ..12페이지
- Release Characteristics of Fission Gases with Spent Fue..14페이지
- Simplified Approximation Method of the Multi-Compartmen..9페이지
- Radioactivity Analysis of 55Fe and 63Ni in Dismantled C..9페이지
- Correlation of l37Cs/60Co Activity Ratio in Radwaste wi..9페이지
- Electrorefining Characteristics of Uranium by Using a G..7페이지
- 한국방사성폐기물학회지 논문 투고요령3페이지