다면체 유한요소를 이용한 복합재 구조의 주기 격자망 생성
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국전산구조공학회
ㆍ수록지정보 : 한국전산구조공학회 논문집 / 27권 / 4호
ㆍ저자명 : 이행수, 손동우, 박종연, 조영삼, 임재혁
ㆍ저자명 : 이행수, 손동우, 박종연, 조영삼, 임재혁
한국어 초록
강화재의 복잡한 배열로 인하여 복합재 구조에 대한 유한요소 모델링은 상당히 까다로운 문제가 될 수 있다. 본 논문에서는 복합재 구조에 대하여 효율적으로 주기 격자망을 생성시킬 수 있는 기법을 제안한다. 먼저 육면체 유한요소로 구성된 규칙적인 격자망을 준비하고, 이를 복합재 내의 강화재에 대한 표면 정보에 맞추어 깎아낸다. 강화재와 기지재 사이에서 깎여진 육면체 유한요소는 임의의 절점과 면을 가질 수 있는 다면체 유한요소에 해당한다. 일관된 알고리즘을 이용하여 육면체 유한요소를 깎아내기 때문에 강화재와 기지재 사이의 요소는 자동적으로 적합한 형태로 구성된다. 또한 대표체적영역 내에서 강화재의 주기성을 추가적으로 고려하면, 대표체적영역에 대한 각각의 주기 경계 쌍에서 절점과 요소의 형태가 모두 일치하는 주기 격자망을 효율적으로 생성시킬 수 있다. 그러므로 별도의 처리 없이 대표체적영역에 주기 경계조건을 부여할 수 있다. 수치예제에서는 본 논문에서 제안한 기법의 효용성을 검증한다.영어 초록
Finite element modeling of composite structures may be cumbersome due to complex distributions of reinforcements. In this paper, an efficient scheme is proposed that can generate periodic meshes for the composite structures. Regular meshes with hexahedral finite elements are first prepared, and the elements are then trimmed to fit external surfaces of reinforcements in the composite structures. The trimmed hexahedral finite elements located at interfaces between the matrix and the reinforcements correspond to polyhedral finite elements, which allow an arbitrary number of nodes and faces in the elements. Because the trimming process is consistently conducted by means of consistent algorithms, the elements of the reinforcements are automatically compatible with those of the matrices. With the additional consideration of periodicity of reinforcements in a representative volume element(RVE), the proposed scheme provides periodic meshes in an efficient manner, which are compatible for each pair of periodic boundaries of the RVE. Therefore, periodic boundary conditions for the RVE are enforced straightforwardly. Numerical examples demonstrate the effectiveness of the proposed scheme for finite element modeling of complex composite structures.참고 자료
없음태그
"한국전산구조공학회 논문집"의 다른 논문
- 방재업무 활용을 위한 개방형 도시정보모델 생성8페이지
- 텐세그리티 구조물의 형상탐색 기법 비교8페이지
- 철근콘크리트 깊은 보의 현행 스트럿-타이 설계기준에 대한 비교 및 평가8페이지
- 페리다이나믹스 이론과 병렬연산을 이용한 균열진전 문제의 형상 설계민감도 해석7페이지
- 3차원 배근설계 및 배근시공도 작성 자동화 시스템 개발8페이지
- 난류 강도가 수평축 풍력발전기 후류 모델에 미치는 영향7페이지
- 해양플랜트 Topside 방화벽에 폭발압의 부압구간이 미치는 영향8페이지
- 사용자지정 재료 서브루틴을 활용한 LNG선박 단열시스템 멤브레인의 수치해석7페이지
- 역량스펙트럼 방법을 이용한 피뢰기의 지진취약도 해석9페이지
- GFRP 판으로 보강된 플랫 플레이트의 전단강도식에 관한 규준의 비교 분석8페이지