복합포장용 고탄성 저수축 롤러전압콘크리트 기층 개발을 위한 기초연구
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국도로학회
ㆍ수록지정보 : 한국도로학회논문집 / 19권 / 1호
ㆍ저자명 : 정건우, 이승우
ㆍ저자명 : 정건우, 이승우
영어 초록
PURPOSES: The main purpose of this study is to develop a high elastic modulus and low-shrinkage roller-compacted concrete base (RCCB) in order to prevent fatigue cracking and reflective cracking in the asphalt surface layer of composite pavement. Using a rigid base material with low shrinkage can be a solution to this problem. Moreover, a strong rigid base with high elastic modulus is able to shift the location of critical tensile strain from the bottom of the asphalt layer to the bottom of the rigid base layer, which can prevent fatigue cracking in the asphalt layer. METHODS: Sensitivity analysis of composite pavement via numerical methods is implemented to determine an appropriate range of elastic modulus of the rigid base that would eliminate fatigue cracking. Various asphalt thicknesses and elastic moduli of the rigid base are used in the analysis to study their respective influences on fatigue cracking. Low-shrinkage RCC mixture, as determined via laboratory testing with various amounts of a CSA expansion agent (0%, 7%, and 10%), is found to achieve an appropriate low-shrinkage level. Shrinkage of RCC is measured according to KS F 2424. RESULTS : This study shows that composite pavements comprising asphalt thicknesses of (h1) 2 in. with E2 > 19 GPa, 4 in. with E2 > 15 GPa, and 6 in. with E2 > 11 GPa are able to eliminate tensile strain in the asphalt layer, which is the cause of fatigue cracking in this layer. Shrinkage test results demonstrate that a 10% CSA RCC mixture can reduce shrinkage by 84% and 93% as compared to conventional RCC and PCC, respectively. CONCLUSIONS: According to the results of numerical analyses using various design inputs, composite pavements are shown to be able to eliminate fatigue cracking in composite pavement. Additionally, an RCC mixture with 10% CSA admixture is able to reduce or eliminate reflective cracking in asphalt surfaces as a result of the significant shrinkage reduction in the RCC base. Thus, this low-shrinkage base material can be used as an alternative solution to distresses in composite pavement.참고 자료
없음"한국도로학회논문집"의 다른 논문
- 고령운전자의 도시부 교차로 주행특성 분석에 관한 연구16페이지
- 고속주행상황의 운전자 인지·반응시간에 관한 연구13페이지
- 노상의 비선형 모델에 근거한 비파괴 FWD 시험에 있어 정적과 동적 거동의 비교연구8페이지
- 시뮬레이션 프로그램을 이용한 특수유형 회전교차로의 운영 효율성 분석10페이지
- 복층터널 중간슬래브 설계 기준 마련을 위한 기본 거동 특성 분석10페이지
- 1액형 광촉매를 아스팔트 포장에 적용하기 위한 기초연구10페이지
- RAP 콘크리트의 비선형 응력-변형률 특성이 강성포장 구조해석에 미치는 영향8페이지
- LS-DYNA를 이용한 비탈면에 설치된 가드레일 지주의 동적거동8페이지
- 침투도랑 인접도로 하부구조의 함수비 측정 및 공용성 분석8페이지
- 콘크리트 교면포장의 자기균열치유 특성에 대한 검토 연구9페이지