격자, 난류모형 및 이산화 방법이 유동해석 결과에 미치는 영향
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 해양환경안전학회
ㆍ수록지정보 : 해양환경안전학회지 / 20권 / 4호
ㆍ저자명 : 박동우, 윤현식
ㆍ저자명 : 박동우, 윤현식
한국어 초록
본 연구는 격자수, 첫 번째 격자까지의 거리(YP+), 난류모델 그리고 이산화 방법에 따른 해의 변화량을 조사하였다. 대상선박은 KVLCC이며, 격자구성과 유동해석은 상용코드인 Gridgen V15와 FLUENT를 사용하였다. 검토는 2가지 파트로 나누어서 수행하였다. 첫 번째 파트는 격자수, 난류모델 그리고 이산화 방법의 조합에 따른 해의 영향성을 평가하였다. 두 번째 파트는 적합한 YP+ 선정에 초점을 두었다. 격자수와 이산화 방법이 동일한 경우 마찰저항은 난류모델에 따라 약 1 % 내에서 차이를 보였으나, 압력저항은 약 9 %의 큰 차이를 보였다. YP+와 이산화 방법이 동일한 경우 YP+를 30과 50으로 설정하였을 때 마찰저항은 난류모델에 따라 약 1 % 내에서 차이를 보였으나, 100에서는 약 3 % 차이를 보였다. 반면, 압력저항은 YP+값에 무관하게 난류모델에 따라 약 10 % 차이를 보였다. 난류모델과 이산화 방법이 동일한 경우 격자 수 변화 따라 마찰저항, 압력저항 그리고 전 저항 모두 큰 차이를 보이지 않았다. 난류모델과 이산화 방법이 동일한 경우 YP+의 변화에 따라 마찰저항은 5~8 %의 큰 차이를 보였고, 압력저항은 큰 차이를 보이지 않았다.영어 초록
The current work investigated the variation of numerical solutions according to the grid number, the distance of the first grid point off the ship surface, turbulence modeling and discretization. The subject vessel is KVLCC. A commercial code, Gridgen V15 and FLUENT were used the generation of the ship hull surface and spatial system and flow computation. The first part of examination, the effect of solutions were accessed depending on the grid number, turbulence modeling and discretization. The second part was focus on the suitable selection of the distance of the first grid point off the ship surface: YP+. When grid number and discretization were fixed the same value, the friction resistance showed differences within 1 % but the pressure resistance showed big differences 9 % depending on the turbulence modeling. When YP+ were set 30 and 50 for the same discretization, friction resistance showed almost same results within 1 % according to the turbulence modeling. However, when YP+ were fixed 100, friction resistance showed more differences of 3 % compared to YP+ of 30 and 50. Whereas pressure resistance showed big differences of 10 % regardless of turbulence modeling. When turbulence modeling and discretization were set the same value, friction, pressure and total resistance showed almost same result within 0.3 % depending on the grid number. Lastly, When turbulence modeling and discretization were fixed the same value, the friction resistance showed differences within 5~8 % but the pressure resistance showed small differences depending on the YP+.참고 자료
없음태그
"해양환경안전학회지"의 다른 논문
패치 로딩을 받는 알루미늄 합금 A6082-T6 사각형 판의 임계 탄성좌굴하중 검토10페이지
고속선 운항 안정성을 위한 수중익 배치 및 종모멘트 특성에 관한 실험적 연구8페이지
복합 구조물의 레이더 반사면적 해석 프로그램 개발8페이지
세일요트의 모노킬과 트윈킬의 저항성능 비교9페이지
실습선 가야호의 멀미도 조사와 MSI 계산의 비교 분석에 관한 연구7페이지
실선 예항시험을 통한 예인선의 소요마력 산출에 관한 연구7페이지
정박지의 효율적 운영을 위한 세칙 개정방안7페이지
기름기록부 실효성 확보에 관한 연구9페이지
낙동강 하구역 진우도 자연해빈의 지하수위 변동해석7페이지
2013년 하계 자란만 서부 연안의 Cochlodinium 적조 미발생 원인 : 영양염 자료를 중심..10페이지