기존 철근 콘크리트 보-기둥 구조물과 채움 프리캐스트 콘크리트 벽패널 사이의 철골 플레이트 전단접합부에 대한 실험과 해석

서지정보

ㆍ발행기관 : 한국복합신소재구조학회 ㆍ수록지정보 : 복합신소재구조학회 논문집 / 8권 / 1호
ㆍ저자명 : 손국원, 유승룡, 송현석

목차

1. 서 론
2. 프리캐스트 콘크리트와 기존 철근콘크리트 사이의 전단 접합부
3. 전단 실험체
3.1 실험체 명
3.2 재료
3.3 실험체 설계
3.4 접합부 설계
4. 전단강도 계산
4.1 RC 부분, 후설치 앵커 전단 강도
4.2 PC 부분, 선설치 철판 전단 강도
4.3 접합부 부분, 철판과 용접부위 전단강도
5. 실험 결과 및 분석
6. 결 론
5.1 실험체 균열과 파괴 거동
5.2 실험체 실험 강도
감사의 글
REFERENCES

영어 초록

When reinforcing an existing reinforced concrete beam-column building with a precast concrete panel, special connection between the PC member and the RC member is required to solve the time dependent deformation of the RC member and to receive the large shear forces. The aim of this study is to obtain the shear strength of upper connection between the existing RC beam-column and infilled PC wall panels in experimentally and theoretically.
Thus, the static shear loading tests were conducted on the 6 specimens with the plate connection. Shear failure was resulted from the weakest portion of interior PC panel, exterior RC, and the connection, when the PC portion which located at the center of specimen was pulled upward from the bottom. T
he experimental result was compared with analytical result from ACI 318M-14 Chapter 17 for the shear strength of post-installed anchor and PCI Handbook 7th edition 6.8 Structural Steel Corbel (PCI Design Handbook 7th edition, 2010) for the strength of cast-in H-beam. The analytical and experimental results show final failure at the same location. The failure loading of experiment showed larger than average 6% to that of the analysis.

참고 자료

없음