제품유형에 따른 제조방식 선호가 구매의도와 품질지각에 미치는 효과
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국감성과학회
ㆍ수록지정보 : 감성과학 / 19권 / 4호
ㆍ저자명 : 이국희, 박성연
ㆍ저자명 : 이국희, 박성연
한국어 초록
제품유형과 가격, 브랜드 이미지 등의 상호작용이 소비자의 구매의도와 품질지각에 미치는 효과에 대해서는 다양한 현상을 관찰해 왔다. 그러나 제품유형과 제조방식의 상호작용이 이 요인들에 미치는 효과에 대해서는 연구가 드물었다. 그러나 3D프린터의 등장은 기계를 통한 자동화 생산과 수공예로 대표되던 제조방식에 3D프린팅이라는 새로운 방식을 추가하였고, 이러한 새로운 틀이 소비자의 구매의도와 품질지각에 영향을 미칠 가능성이 있기에 연구가 필요하다. 따라서 본 연구는 제품유형과 제조방식의 상호작용이 구매의도와 품질지각에 미치는 효과를 검증하기 위하여 이루어졌 다. 이를 위한 실험 1은 성격이 다른 제품유형(드론 vs. 바이올린 vs. 컵)을 선정하였고, 제품유형별로 선호하는 제조방식 이 다르게 나타나는지 측정하였다. 결과적으로 소비자들은 드론과 같은 최신제품은 3D프린팅 제작을, 바이올린은 수공예 제작을, 컵은 대량생산이 용이한 기계 제작을 선호하는 것으로 나타났다. 실험 2는 제품유형에 따른 제작방식 선호의 차이가 구매의도와 품질지각에 미치는 영향에 대한 검증을 시도하였다. 즉 드론은 3D프린팅 제조일 때 구매의도 가 가장 높았고, 바이올린은 수공예일 때 구매의도가 가장 높았으며, 컵은 기계 제작일 때 구매의도가 가장 높았다. 또한 드론은 제작방식 간 품질지각에 차이가 없었던 반면, 바이올린은 수공예의 품질을 가장 우수하다고 지각했고, 컵은 3D프린팅에서 품질을 가장 낮게 지각했다(컵은 3D프린팅 제작일 때 구매의도도 가장 낮았다). 본 연구가 소비자 심리학, 마케팅, 광고 등의 분야에 폭넓은 시사점을 줄 것으로 기대한다.영어 초록
Studies have observed various phenomena regarding the effect of the interaction between type, price, and brand image of a product on consumers’ purchase intent and product quality perception. Yet, few have studied the effect of the interaction between product type and manufacturing method on these factors. However, the advent of three-dimensional (3D) printers added a new manufacturing method, 3D printing, to the traditional methods of handicraft and automated machine-based production, and research is necessary since this new framework might affect consumers’ purchase intent and product quality perception. Therefore, this study aimed to verify the effects of the interaction between product type and manufacturing method on purchase intent and product quality perception. To achieve this, in our experiment 1, we selected product types with different characteristics (drone vs. violin vs. cup), and measured whether consumers preferred different manufacturing methods for each product type. The results showed that consumers preferred the 3D printing method for technologically advanced products such as drones, the handmade method for violins, and the automated machine-based manufacturing method, which allows mass production, for cups. Experiment 2 attempted to verify the effects of the differences in manufacturing method preferences for each product type on consumers’ purchase intent and product quality perception. Our findings are as follows: for drones, the purchase intent was highest when 3D printing was used; for violins, the purchase intent was highest when the violins were handmade; for cups, the purchase intent was highest when machine-based manufacturing was used. Moreover, whereas the product quality perception for drones did not differ across different manufacturing methods, consumers perceived that handmade violins had the highest quality and that cups manufactured with 3D printing had the lowest quality (the purchase intent for cups was also lowest when 3D printing was used). This study is anticipated to provide a wide range of implications in various areas, including consumer psychology, marketing, and advertising.참고 자료
없음태그
"감성과학"의 다른 논문
- 불쾌감을 유발하는 구취와 의치장착의 상호관계10페이지
- 이상감각과 통증을 호소하는 당뇨병 환자의 전기생리학적 특징 분석8페이지
- 구강 호흡이 뇌기능에 미치는 영향에 관한 EEG 연구8페이지
- 다층자료의 매개효과 분석: 통계방법, 분석절차 및 실례16페이지
- 아웃도어 재킷의 기능성표기 행택 유형에 대한 소비자의 이해도 및 선호도 연구12페이지
- 남성복의 감성 및 선호 스타일과 실제 착용간의 차이12페이지
- 커피음용행동의 의미와 목적에 대한 개념도 분석16페이지
- 멀티채널 쇼핑상황에서 신뢰, 불확실성, 거래비용 및 뉴로티시즘이 지속구매의도에 미치는 영향14페이지
- 빛을 활용한 배려: 임산부 LED 엠블럼의 효과 연구8페이지
- 라이프로깅 애플리케이션 콘텐츠 구성을 위한 사용자 행태 분류8페이지