세라믹 막여과의 성능향상을 위한 응집 전처리의 적용
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 대한상하수도학회
ㆍ수록지정보 : 상하수도학회지 / 31권 / 6호
ㆍ저자명 : 강준석, 송지영, 박서경, 정아영, 이정준, 서인석, 채선하, 김성수, 김한승
ㆍ저자명 : 강준석, 송지영, 박서경, 정아영, 이정준, 서인석, 채선하, 김성수, 김한승
목차
1. 서 론2. Methods
2.1 실험원수
2.2 응집실험 (Jar-test)
2.3 Lab-scale 세라믹 평가장치
2.2 분석방법
3. Results and Discussion
3.1 전처리 조건 선정
3.2 전처리 공정 별 막여과 평가
3.3 전처리 공정 별 차압변화 관찰
3.4 전처리 공정 별 물리세척에 의한 회복
4. Conclusions
사 사
References
영어 초록
In this study, it is estimated that ceramic membrane process which can operate stably in harsh conditions replacing existing organic membrane connected with coagulation, sedimentation etc. . Jar-test was conducted by using artificial raw water containing kaolin and humic acid. It was observed that coagulant (A-PAC, 10.6%) 4mg/l is the optimal dose. As a results of evaluation of membrane single filtration process (A), coagulation-membrane filtration process (B) and coagulation-sedimentation-membrane filtration process (C), TMP variation is stable regardless of in Flux 2 m3/m2・day. But in Flux 5 m3/m2・day, it show change of 1-89.3 kpa by process. TMP of process (B) and (C) is increased 11.8, 0.6 kpa each. But, the (A) showed the greatest change of TMP. When evaluate (A) and (C) in Flux 10 m3/m2・day, TMP of (A) stopped operation being exceeded 120 kpa in 20 minutes. On the other hand, TMP of (C) is increased only 3 kpa in 120 minutes. Through this, membrane filtration process can be operated stably by using the linkage between the pretreatment process and the ceramic membrane filtration process. Turbidity of treated water remained under 0.1 NTU regardless of flux condition and DOC and UV254 showed a removal rate of 65-85%, 95% more each at process connected with pretreatment. Physical cleaning was carried out using water and air of 500kpa to show the recovery of pollutants formed on membrane surface by filtration. In (A) process, TMP has increased rapidly and decreased the recovery by physical cleaning as the flux rises. This means that contamination on membrane surface is irreversible fouling difficult to recover by using physical cleaning. Process (B) and (C) are observed high recovery rate of 60% more in high flux and especially recovery rate of process (B) is the highest at 95.8%. This can be judged that the coagulation flocs in the raw water formed cake layer with irreversible fouling and are favorable to physical cleaning. As a result of estimation, observe that ceramic membrane filtration connected with pretreatment improves efficiency of filtration and recovery rate of physical cleaning. And ceramic membrane which is possible to operate in the higher flux than organic membrane can be reduce the area of water purification facilities and secure a stable quantity of water by connecting the ceramic membrane with pretreatment process.참고 자료
없음"상하수도학회지"의 다른 논문
- 대형 하수박스암거의 속성 데이터베이스 구축을 위한 결함유형 평가10페이지
- 송・배수시스템의 최적 잔류염소농도 관리 모델 개발11페이지
- 해수 담수화 설비의 취수 및 배출수 해저 배관 최적화 설계11페이지
- 고전압 펄스의 수중인가 조건이 하이드록실 라디칼 생성에 미치는 영향8페이지
- 국내・외 하수도시설 미량유기물질의 발생 특성 및 관리체계에 대한 이해6페이지
- 강우유출수 차집능력 증대형 빗물받이의 성능 평가9페이지
- 석회계 입상알칼리재의 용출특성과 이를 이용한 인 결정화공정의 적용성10페이지
- 철 코팅 규사의 인산이온 제거 효율 평가 연구7페이지
- 모래여과 공정과 막여과 공정의 운영효율 비교9페이지
- 막여과 정수처리공정에서 망간에 의한 막오염 특성 및 화학세정효율 평가11페이지