Micro strip line을 이용한 0~3GHz Low Pass Filter (LPF)
- 최초 등록일
- 2011.01.14
- 최종 저작일
- 2010.06
- 9페이지/ 한컴오피스
- 가격 1,500원
소개글
Low Pass Filter를 디자인 하는 프로젝트 입니다.
✔Passband frequency = 0 to 3 GHz.
✔Equal-ripple response in the passband with maximum allowable ripple level
of 0.5 dB.
✔Desired attenuation at 4.0 GHz = 30 dB.
✔The characteristic impedance is 50 Ω.
위의 조건을 만족시킬 수 있는 Equal-Ripple LPF Prototype의 차수를 정하고 Richard`s Transformation과 Kuroda`s Identity를 이용하여 실제 Micro strip Line까지 구현해 보았습니다.
AWR이라는 프로그램을 이용하였습니다. (ADS와 비슷함)
목차
Ⅰ. Introduction
Ⅱ. Procedure
1) 차수 결정
2) Element 값 결정
3) Richard`s Transformation
4) Kuroda`s Identity
5) Impedance & Frequency Scaling
Ⅲ. Result
1) Substrate
2) Schematic
3) EM Structure
4) Scattering Parameter
Ⅳ. Discussion
* Reference
본문내용
이번 설계의 목표는 Low Pass Filter를 디자인 하는 것이다. Low Pass Filter를 디자인 하는 방법에는 여러 가지가 있지만 이번 설계에서는 Equal-Ripple LPF Prototype Method를 이용할 것이다.
한편, 우리가 설계할 Low Pass Filter는 다음과 같은 조건을 만족시켜야 한다.
✔Passband frequency = 0 to 3 GHz.
✔Equal-ripple response in the passband with maximum allowable ripple level
of 0.5 dB.
✔Desired attenuation at 4.0 GHz = 30 dB.
✔The characteristic impedance is 50 Ω.
위의 조건을 만족시킬 수 있는 Equal-Ripple LPF Prototype의 차수를 정하고 Richard`s Transformation과 Kuroda`s Identity를 이용하여 실제 Micro strip Line까지 구현해 볼 것이다.
참고 자료
* Reference
- 위키백과 한국어판 http://ko.wikipedia.org/
- David M. Pozar, Microwave Engineering, 3rd Edition
- 기판 제작 http://www.taconic-add.com/en--products--material-view.php