열전대 실험
- 최초 등록일
- 2018.12.14
- 최종 저작일
- 2015.05
- 5페이지/ 한컴오피스
- 가격 1,000원
소개글
열전대 실험 보고서 입니다.
목차
1. Thermocouple(열전대)이란?
2. 실험
- 실험장치 개요
- 실험 방법
3. 실험 결과
- 전류 측정값과 Table을 참고한 온도 값
- 그래프
4. 실험 결과에 대한 고찰
본문내용
1. Thermocouple이란?
1)Thermocouple의 역사
- 1821년 제베크(Thomas Johann Seebeck)는 두 종류의 금속 A,B를 접합하고,양 접점에 온도를 달리 해주면 온도차에 비례하여 열기전력이 생긴다는 것을 발견했다.
2)Thermocouple의 종류
- Type T - Copper(+) versus nickel-45%copper(-)
- Type J - Iron(+) versus nickel-45%copper(-)
- Type E - Nickel-10% Chromium(+) nickel-45%copper(-)
- Type K - Nickel-10% chromium - 1 1/2silicon(+) versus nickel - 4 1/2% silicon-1/10%magnesium(-)
- Type N – Nickel-14% chromium-1% silicon(+) versus nickel-4 1/2% silicon-1/10% magnesium(-)
- Type R – Platinum-13% rhodium(+) versus platinum(-)
- Type S – Platinum-10% rhodium(+) versus platinum(-)
- Type B – Platinum-30% rhodium(+) versus platinum-6% rhodium(-)
3)Thermocouple의 원리
- 한쪽 접촉점을 기준점으로 삼고 측정하고자 하는 부위에 다른 접촉 점을 위치하면 기전력의 크기로 온도차를 알 수 있으므로 기준점의 온도와 비교하여 온도를 측정하게 된다.
4) Seebeck 효과
- The seebeck effect concerns the conversion of thermal energy into electrical energy.
참고 자료
Manual on The Use of Thermocouples in Temperatrure Meawurementl(Fourth Edition)
(The Seebeck Effect. p.29)
http://terms.naver.com/entry.nhn?docId=347450&cid=44 16&categoryId=44616