[공학실험]스트레인게이지 실험
- 최초 등록일
- 2006.06.19
- 최종 저작일
- 2006.06
- 5페이지/ 한컴오피스
- 가격 1,000원
소개글
이 레포트는 스트레인 게이지의 이해와 스트레인 게이지를 이용한 스트레인의 측정, 그리고 실험에서 측정한 스트레인을 이용하여 응력과 압력의 계산하는 과정이 각 과정별로 자세히 설명되어 있는 레포트입니다.
특별히 여기에선 원통형 압력용기(캔)를 실험대상으로 정하고 캔의 설계타당성을 검증하며 내부압력을 검증하기 위한 스트레인의 양을 측정했습니다.
각 과정엔 그 유도과정이나 고찰내용이 빠짐없이 적혀있습니다.
물론 평가에선 만점을 받았죠 ^^
좋은 점수 받으세요 ^^
목차
목적
이론
장비
공학실험 과정
실험결과
오차원인분석
실험을 마치고
본문내용
■ 공학실험 과정
1. prepare a can per each team.
2. apply strain gages in longitudinal and circumferential(Hoop) directions
3. connect strain gages cables to strain indicators
4. set strain indicators zero for the longitudinal and circumferential strains of the unpopped beverage can.
5. pop the top of the beverage can to relieve the internal pressure and wait several minutes to stabilize the strains during relieving pressure.
6. measure the longitudinal()and circumferential () strains of the can
7. measure the thickness and radius of the can if possible
8. evaluate the longitudinal and circumferential stress (with E=70Gpa, =0.33)
9. what is the internal pressure before popping the can.
10. what is the circumferential and longitudinal stresses?
11. What is the margin of the safety (M.S.)for the given yield strength ?
(safety factor = 1.5, =20Mpa)?
참고 자료
없음