혼합법칙을 이용한 황동 개재물이 있는 Al 정사각판의 고유진동수 해석
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국전산구조공학회
ㆍ수록지정보 : 한국전산구조공학회 논문집 / 19권 / 4호
ㆍ저자명 : 이윤복, 이세훈, 이영신
ㆍ저자명 : 이윤복, 이세훈, 이영신
한국어 초록
황동 개재물이 있는 Al 정사각판의 고유진동수는 혼합법칙을 이용하여 해석되었다. 혼합법칙에 의한 고유진동수는 개재물의 크기에 따른 유효 내평면 파동속도와 무차원 진동수 매개변수와의 곱으로 이루어진다. 해석모델은 외팔형, 2변 고정-2변 자유형, 3변 고정-1변 자유형 및 4변 고정형의 황동 개재물이 있는 4가지의 Al판이다. 자유단이 1개 이상 존재하는 경계조건에서 개재물이 판의 중앙에 위치하였을 때 개재물에 대한 판 전체의 면적비가 1/9 이하이면 혼합법칙 및 유한요소 해석에 의한 고유진동수는 10% 이내로 잘 일치하였다 4변 고정형 경계조건을 제외하고 3가지 경계조건에서 개재물이 판중앙에 있을 경우 개재물의 크기가 커짐에 따라 개재물이 있는 판의 고유진동수는 낮아짐을 알았다. 또한 개재물의 밀도가 판의 밀도보다 작을 때, 개재물 크기가 커짐에 따라 개재물이 있는 판의 고유진동수는 높아진다.영어 초록
The natural frequencies of Al square plates with a brass inclusion were analyzed by the rule of mixtures. The rule of mixtures is the method to derive natural frequency mutiplying effective inplane wane speed and nondimensional frequency parameters. Numerical models were Al square plates with an inclusion with cantilever type, 2 clamped edge-2 free edge type, 3 clamped edge-1 free edge type and fully clamped edge type. In cantilever type plates, 2 clamped edge-2 free edge type plates and 3 clamped edge-1 free edge plates with an inclusion, good agreement within 10% obtained from rule of mixtures' results and numerical analysis results within inclusion area ratio 1/9. It was found that the natural frequencies of the cantilever type, 2 clamped edge-2 free edge type and 3 clamped edge-1 free edge type plates with an inclusion decrease as the size of inclusion increases when inclusion is located center of plates. And when the density of inclusion is less than the plates, natural frequency of plates with an inclusion increases as the size of inclusion increases.참고 자료
없음태그
"한국전산구조공학회 논문집"의 다른 논문
- 아치구조물의 구조해석에서 수치미분의 적용7페이지
- 2차원 균열판의 p-적응적 유한요소해석을 위한 정규크리깅 보간법의 적용12페이지
- 실시간 하이브리드 진동대 실험법을 이용한 TLD 제어성능의 실험적 검증9페이지
- 개선된 일차전단변형이론을 이용한 복합재료 적층평판의 고정밀 해석12페이지
- 간격 유한요소해석을 이용한 구조물의 위상 최적화10페이지
- 지진하중을 받는 철근콘크리트 장주의 효과13페이지
- 풍하중을 받는 송전철탑의 정적, 동적 및 좌굴해석6페이지
- 부재 그룹과 하중 조합을 고려한 고층건물 변위조절 설계법11페이지
- 화이버 요소를 이용한 3차원 강구조물의 비선형 비탄성 해석10페이지
- 중공단면 복합소재 교량 바닥판의 실험적 피로특성 분석9페이지