개선된 일차전단변형이론을 이용한 복합재료 적층평판의 고정밀 해석
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국전산구조공학회
ㆍ수록지정보 : 한국전산구조공학회 논문집 / 19권 / 4호
ㆍ저자명 : 김준식, 조맹효
ㆍ저자명 : 김준식, 조맹효
한국어 초록
본 논문에서는 일차전단변형이론(FSDT)을 이용한 복합재료 적층평판의 고정밀 해석기법을 소개한다. 전단수정계수가 자동적으로 포함되도록 횡방향 전단 변형에너지를 혼합변분이론(mixed variational theorem)을 이용하여 개선하였다. 혼합변분이론에서는 변분을 횡방향 응력들에 대해서만 취하였다. 가정된 횡방향 전단응력은 효율적인 고차이론(Cho and Parmerter, 1993)으로부터 구하였다 횡방향 수직응력은 3차 다항식으로 가정하였고, 무전단 응력조건과 평판의 윗면과 아랫면에서의 응력을 만족하는 조건을 부과함으로써 얻었다. 한편, 변위들에 대해서는 일차전단변형이론의 변위장을 사용하였다. 이렇게 해서 얻어진 변형 에너지를 본 논문에서는 EFSDTM3D이라고 명명 하였다. 본 논문에서 개발된 EFSDTM3D는 변위와 응력의 계산에서 고전적인 FSDT와 같은 정도의 계산 효율을 가지면서, 동시에 변위와 응력의 두께방향의 정확도를 면내 방향 응력들에 대한 최소오차자승법에 기초하여 응력 회복 과정을 적용함으로써 개선하였다. 계산된 결과는 고전적인 FSDT, 3차원 탄성해, 그리고 참고문헌 중에서 이용 가능한 결과들과 비교하여 검증하였다.영어 초록
In this paper, an efficient yet accurate stress analysis based on the first-order shear deformation theory (FSDT) is presented. The transverse shear strain energy is modified via the mixed variational theorem, so that the shear correction factors are automatically involved in the formulation. In the mixed variational formulation, the transverse stresses are taken to be functions subject to variations. The transverse shear stresses based on an efficient higher order plate theory (EHOPT, Cho and Parmerter, 1993) are utilized and modified, while the transverse normal stress is assumed to be the third-order polynomial of thickness coordinates, which satisfies both zero transverse shear stresses and prescribed surface fractions in top and bottom surfaces. On the other hand, the displacements are assumed to be those of the FSDT Resulting strain energy expressions are referred to as an EFSDTM3D that stands for an enhanced first-order shear deformation theory based on the mixed formulation for three dimensional elasticity, The developed EFSDTM3D preserves the computational advantage of the classical FSDT while allowing for important local through-the-thickness variations of displacements and stresses through the recovery procedure that is based on the least square minimization of in-plane stresses. Comparisons of displacements and stresses of both laminated and sandwich plates using the present theory are made with the classical FSDT, three-dimensional exact solutions, and available data in the literature.참고 자료
없음"한국전산구조공학회 논문집"의 다른 논문
- 아치구조물의 구조해석에서 수치미분의 적용7페이지
- 2차원 균열판의 p-적응적 유한요소해석을 위한 정규크리깅 보간법의 적용12페이지
- 실시간 하이브리드 진동대 실험법을 이용한 TLD 제어성능의 실험적 검증9페이지
- 혼합법칙을 이용한 황동 개재물이 있는 Al 정사각판의 고유진동수 해석8페이지
- 간격 유한요소해석을 이용한 구조물의 위상 최적화10페이지
- 지진하중을 받는 철근콘크리트 장주의 효과13페이지
- 풍하중을 받는 송전철탑의 정적, 동적 및 좌굴해석6페이지
- 부재 그룹과 하중 조합을 고려한 고층건물 변위조절 설계법11페이지
- 화이버 요소를 이용한 3차원 강구조물의 비선형 비탄성 해석10페이지
- 중공단면 복합소재 교량 바닥판의 실험적 피로특성 분석9페이지